Heating systems 2017-07-05T13:55:32+00:00
Accu Heat 162Wh

Description

ACCU HEAT 162Wh set

The set consists of ACCU M and Heating Vest Controller. ACCU is made from anodised aluminium and delrin, controller’s can – from delrin.

RCA connection

ACCU M is equipped with two RCA connection ports, connected directly to the battery pack. It comes with one RCA port cap. RCA ports are made from nickel plated brass and the connection is protected with a sealing oring.

Controller

The controller’s work is to adjust the voltage from 14.4 to 12V, which makes it compatible with major underwater heating systems. It has two power modes: 100% and 50% indicated by the blue light around the piezo button. Switching between the modes is easy with a single press of the piezo switch. When turned off it indicates – with red light – the battery pack charge level.

E/O connector

Genuine E/O connector perfectly works with THERMO Valve. Permanently sealed inside. Most popular type of connection in underwater heating systems.

Photos

Tech specification

ACCU M

To be used with 3XML Alexandra / 4TEC /
7XPE / NW7 / TEK-ONE
Material anodised aluminium and POM
Max operating depth 100m
Battery pack type Lithium-Ion
Battery pack voltage 14.4V
Battery pack capacity 11.25Ah
Charger microprocessor / 2.8A
Charging time up to 4h
Number of RCA ports 2
Dimensions 280mm (length) x 75mm (diameter)
Weight on the surface 1.8kg
Weight underwater 1.5kg
Certification UN38.3 and CE approved

Heated vest controller

To be used with light-for-me 14.4V ACCUs
and compatible E/O 12V heating system
How it works adjusts voltage from 14.4V to 12V
Material POM
Switch type piezo
Modes of work 2 (100% and 50%)
Max operating depth 100m
Cable 1 x E/O ca. 14cm and RCA ca. 45cm long
Dimensions switch 48mm (diameter) x 28mm (length)
Weight on the surface 0.34kg

Documentation

Availability

This product is available from our distributors or in our online store.

Click here to locate your local distributor.

Click here to view this product in our internet shop.

Click here to view this product in our internet shop for customers from Poland.

Accu Heat 18Ah 12V E/O

Description

Built

ACCU HEAT 12V 18Ah is built from anodsied aluminum and delrin, RCA ports – nickel plated brass. Lithium-Ion battery pack has the mandatory CE and UN 38.3 certification. The set includes: codura protective sleeve with stainless steel jubilee clips, dedicated charger, one RCA port cap and RCA-E/O cord.

RCA ports

ACCU HEAT is equipped with two RCA ports – one connected directly to the batery pack, the other through a switch. The set includes one RCA port cap to be put on the unused port. Each RCA port has one sealing oring. Maintenance of RCA port is simple – clean and dry the RCA connection port, grease the oring inside the port if necessary and store it in a cool and dry place.

Switch

Switch of ACCU HEAt is placed on the bottom of the canister.
Easily accessible when assembled on the harness. Its built makes it easy to switch the accu on / off even in cold water when wearing gloves with thick lining.

Usage

ACCU HEAT is dedicated fro technical divers who want to connect their light-for-me RCA head (port direct) and compatible heating systems (port switch). ACCU HEAT 12V 18Ah is dedicated for SANTI™heating systems.

Photos

Tech specification

To be used with Santi™ heating systems / 4TEC /
7XPE / NW7 / TEK-ONE
Material anodised aluminium and POM
Max operating depth 100m
Battery pack type Lithium-Ion
Battery pack voltage 12V
Battery pack capacity 18Ah
Charger microprocessor / 2.8A
Charging time up to 6h
Number of RCA ports 2 (one direct / one switch)
Cable 1 x E/O included / ca. 45cm long
Dimensions 350mm (length) x 70mm (diameter)
Weight on the surface 2.45kg
Weight underwater 2kg
Certification UN38.3 and CE approved

Documentation

Availability

This product is available from our distributors or in our online store.

Click here to locate your local distributor.

Click here to view this product in our internet shop.

Click here to view this product in our internet shop for customers from Poland.

Accu Heat 324Wh

Description

ACCU HEAT 324Wh set

The set consists of ACCU L and Heating Vest Controller. ACCU is made from anodised aluminium and delrin, controller’s can – from delrin.

RCA connection

ACCU L is equipped with two RCA connection ports, connected directly to the battery pack. It comes with one RCA port cap that protects the RCA port and battery pack if one of the ports is unused. RCA ports are made from nickel plated brass and the connection is protected with a sealing oring.

Controller

The controller’s work is to adjust the voltage from 14.4 to 12V, which makes it compatible with major underwater heating systems. It has two power modes: 100% and 50% indicated by the blue light around the piezo button. Switching between the modes is easy with a single press of the piezo switch. When turned off it indicates – with red light – the battery pack charge level.

E/O connector

Genuine E/O connector perfectly works with THERMO Valve. Permanently sealed inside. Most popular type of connection in underwater heating systems.

Photos

Tech specification

ACCU L

To be used with 3XML Alexandra / 4TEC /
7XPE / NW7 / TEK-ONE
Material anodised aluminium and POM
Max operating depth 100m
Battery pack type Lithium-Ion
Battery pack voltage 14.4V
Battery pack capacity 22Ah
Charger microprocessor / 4.5A
Charging time up to 4h 50min
Number of RCA ports 2
Dimensions 320mm (length) x 75mm (diameter)
Weight on the surface 2.3kg
Weight underwater 2kg
Certification UN38.3 and CE approved

Heated vest controller

To be used with light-for-me 14.4V ACCUs
and compatible E/O 12V heating system
How it works adjusts voltage from 14.4V to 12V
Material POM
Switch type piezo
Modes of work 2 (100% and 50%)
Max operating depth 100m
Cable 1 x E/O ca. 14cm and RCA ca. 45cm long
Dimensions switch 48mm (diameter) x 28mm (length)
Weight on the surface 0.34kg

Documentation

Availability

This product is available from our distributors or in our online store.

Click here to locate your local distributor.

Click here to view this product in our internet shop.

Click here to view this product in our internet shop for customers from Poland.

Heated vest controller

Description

14.4V to 12V RCA to E/O conversion

RCA standard connector fits the whole range of Light For Me Accus

Brass gland with golden plated RCA connector

E/O Connector – most popular connecting system in underwater heatings

Genuine E/O connector perfectly works with THERMO Valve. Permanently sealed inside.

Two levels of power and battery pack charge level indicator

Microprocessor controls the power transmitted to heated vest and sets it on requested level 100% or 50%. Number of red flashes shows current level of energy cumulated in the battery pack.

Photos

Tech specification

To be used with light-for-me 14.4V ACCUs
and compatible E/O 12V heating system
How it works adjusts voltage from 14.4V to 12V
Material POM
Switch type piezo
Modes of work 2 (100% and 50%)
Max operating depth 100m
Cable 1 x E/O ca. 14cm and RCA ca. 45cm long
Dimensions switch 48mm (diameter) x 28mm (length)
Weight on the surface 0.34kg

Documentation

Availability

This product is available from our distributors or in our online store.

Click here to locate your local distributor.

Click here to view this product in our internet shop.

Click here to view this product in our internet shop for customers from Poland.

E/O connector for drysuit

Description

E/O connector for drysuits

Thermo valve is dedicated to be used with compatible heating systems and power sources equipped with E/O connector.

Built

Thermo valve is made from delrin and dedicated to be used with Apeks® drysuit valves.

Heat connector

Connector on the heat side fits the range of SANTI™ heating system products.

Photos

Tech specification

To be used with Santi™ heating system Apeks drysuit inflation valve and compatible E/O ACCU
Material POM
Max operating depth 100m
Cable 1 x E/O ca. 14cm and RCA ca. 45cm long
Dimensions 64mm (diameter) x 20mm (length)
Weight on the surface Weight on the surface

Documentation

Availability

This product is available from our distributors or in our online store.

Click here to locate your local distributor.

Click here to view this product in our internet shop.

Click here to view this product in our internet shop for customers from Poland.

Sidemount Heating System

Description

162Wh Sidemount Heating set

The set consists of ACCU M 11.25Ah SideMount BackMount and Heating System Controller also in sidemount version. ACCU is made from anodised aluminium and delrin, controller’s can – from delrin.

RCA connection

ACCU M is equipped with two RCA connection ports, connected directly to the battery pack. One port is for backmounted gear configuration, one for sidemount divers. It comes with one RCA port cap. RCA ports are made from nickel plated brass and the connection is protected with a sealing oring.

Flexibility

The set-up gives its user required flexibility – the RCA cable is long enough for sidemount gear configuration, meaning the controller’s switch will be positioned close to the chest, within easy arms’ reach.

Controller

The controller’s work is to adjust the voltage from 14.4 to 12V, being therefore compatible with major underwater heating systems. It has two power modes – 100% and 50% – indicated by the blue light around the piezo switch. When pressed off it indicates – with red light – the battery pack charge level.

E/O connector

Genuine E/O connector perfectly works with THERMO Valve. Permanently sealed inside. Most popular type of connection in underwater heating systems.

Photos

Tech specification

Accu M 11.25Ah 14.4V Sidemount Backmount

Purpose sidemount accu for light-for-me RCA heads
Material anodised aluminium and POM
Max operating depth 100m
Battery pack type Lithium-Ion
Battery pack voltage 14.4V
Battery pack capacity 11.25Ah
Charger microprocessor / 2.8A
Number of RCA ports 2
Dimensions 280mm (length) x 75mm (diameter)
Weight on the surface 1.9kg
Weight underwater 1.5kg
Certification UN38.3 and CE approved

Heated vest controller

To be used with light-for-me 14.4V ACCUs and compatible E/O 12V heating system
How it works adjusts voltage from 14.4V to 12V
Material derlin, RCA cable and E/O cable
Max operating depth 100m
Cable 1 x E/O ca. 14cm and RCA ca. 45cm long
Dimensions switch 48mm (diameter) x 28mm (length)
Weight on the surface 0.34kg

Documentation